351 Reply by scorpio810

(25 replies, posted in DE : Hilfe, Vorschläge, Unterhaltungen...)

But there is Version 0.100 and i have 0.90 from the official Linux Mint repo.

do i have to take this?

Note: 0.90 was now very old...

Ubuntu pinning
The following entry assigns a high priority to all versions of the QElectroTech package beginning with 0.100. :
This way, your system will download the higher package version from the ppa and not those from the official Ubuntu repositories.

By using command below:

cat <<EOF | sudo tee /etc/apt/preferences.d/40qelectrotech-devel
Package: qelectrotech*
Pin: version 0.100.*
Pin-Priority: 1001
EOF

Go to forum: DE : Hilfe, Vorschläge, Unterhaltungen...

352 Reply by scorpio810

(25 replies, posted in DE : Hilfe, Vorschläge, Unterhaltungen...)

Hi Kellermorph,

sudo add-apt-repository ppa:scorpio/qelectrotech-dev
sudo apt update

sudo apt install qet-tb-generator pysimplegui

FYI for linux Mint 22
qet-tb-generator    1.3.1-2ubuntu4 (2024-12-17)
pysimplegui           4.41.2-3ubuntu8 (2024-03-17)

https://launchpad.net/~scorpio/+archive … lter=noble

Go to forum: DE : Hilfe, Vorschläge, Unterhaltungen...

353 Reply by scorpio810

(25 replies, posted in DE : Hilfe, Vorschläge, Unterhaltungen...)

Hello Kellermorph,

What your OS, Debian, Ubuntu?
I made packages for it!

See https://qelectrotech.org/forum/viewtopic.php?id=2857

Go to forum: DE : Hilfe, Vorschläge, Unterhaltungen...

354 Reply by scorpio810

(9 replies, posted in News)

Bonjour,

pour windows il il faut installer la dernière version de python, ne pas oublier a la fin de l'installation de cocher "installer python dans le path".
https://www.python.org/downloads/windows/
Download Windows installer (64-bit)
https://www.python.org/ftp/python/3.12. … -amd64.exe

Puis installer le plugin, voir ici:
>> First install on Windows
1. Install, if required, python 3.5 or above
2. pip3 install qet_tb_generator

https://qelectrotech.org/forum/viewtopi … 824#p19824



A noter qu'il existe des versions dites portables ou le plugin et python sont dans le .exe, mais certains antivirus ne l'acceptent pas:
B. Using the portable versions. Available at:

Windows: https://download.qelectrotech.org/qet/b … rator_win/
Tu télécharge la qet_tb_generator-1.3.1.exe que tu renommes en qet_tb_generator.exe
Rename to qet_tb_generator.exe and put it on your C:\Users\[username]\AppData\qet\

Go to forum: News

355 Reply by scorpio810

(2 replies, posted in EN : Help, suggestions, discussions, ...)

You're right, the size of the tabs increases a lot if the folio title is very long.
I don't know if it will be possible or easy to truncate the folio name in the wiget header if name was so long.

But if you place the mouse cursor on the header tab with the scroll mouse you can navigate quickly even if the header tabs are larger, or use page down/up keyboard touch keys for quicly navigating (the keys depend on your operating system).

Go to forum: EN : Help, suggestions, discussions, ...

356 Reply by scorpio810

(41 replies, posted in Scripts)

Hello,

in last version 0.100-dev "Import an element to resize" was implanted directly on element editor, no need to use terminal if you want.
See the plc-user's quick-guide  -> https://download.qelectrotech.org/qet/Q … ick-guide/

https://qelectrotech.org/forum/viewtopic.php?id=2795

For installation and can be launched in element editor it's the same way like dxf2elmt install see:
https://qelectrotech.org/forum/viewtopi … 116#p17116

Go to forum: Scripts

357 Reply by scorpio810

(209 replies, posted in Import DXF)

I'll have to find plc-user's messages about the dimensions of the thumbnails, like this.
https://qelectrotech.org/forum/viewtopi … 393#p17393

Go to forum: Import DXF

358 Reply by scorpio810

(209 replies, posted in Import DXF)

That is obviously a very large item on an A4 sheet of paper, real world dimensions in landscape it's about 30% of the height, and 70% of the width, so perhaps this isn't the best way to do it. I am open to suggestions or thoughts on how better to map the real world dimensions to useful pixels for the elements.

Hello Vadoola!
Hallo plc-user!

@Vadoola: Don't rely too much on the default folio dimensions columns 17 X60 pixels and Rows 8 X 80 pixels...

Personally, I use 24X60 pixels by 12X80 pixels for my titleBlocks, so the elements are smaller than on a default folio.
https://qelectrotech.org/forum/viewtopi … 048#p17048

Go to forum: Import DXF

359 Reply by scorpio810

(15 replies, posted in EN : Help, suggestions, discussions, ...)

LievenC wrote:

In the new version I found another issue
I selected a template from the user blocks
and deleted the template
the template is removed from the folder but not from the list
same applies for copany and QET blocks

I can't reproduce the bug you describe, you saw in project widgets list, maybe you saw in project embeded title blocs?

https://download.qelectrotech.org/qet/forum_img_2/company_titleblock.png

Go to forum: EN : Help, suggestions, discussions, ...

360 Reply by scorpio810

(15 replies, posted in EN : Help, suggestions, discussions, ...)

I can't check now, but on the ready to use version I added the company folders in the conf directory, if you want to backup your conf when you upgrade from 0.9 to 0.100 you need to create these folders manually in your conf directory.

laurent@debian:~/paquet_qet/readytouse_base/conf$ tree
.
├── elements
├── elements-company
├── qelectrotech.conf
├── titleblocks
└── titleblocks-company
 
5 directories, 1 file

Otherwise, by default, the program can't find its folders ( elements-company, titleblocks-company). That seems to be the problem you've encountered, fixed by enter new path in setting, I think.

Go to forum: EN : Help, suggestions, discussions, ...

361 Reply by scorpio810

(9 replies, posted in Terminal block generator)

gleissoncg2 wrote:

Oh Great ! Worked perfectly ! Tks scorpio810 !

Great, thanks, what have you used python virtual env or my debs packages?

Go to forum: Terminal block generator

362 Reply by scorpio810

(1 replies, posted in FR : Aide, suggestions, discussions, ...)

Bonsoir,

menu édition-> chercher et remplacer ou ctrl +F, voir dans la section folio.

https://youtu.be/eOuN7lGf5xQ

Go to forum: FR : Aide, suggestions, discussions, ...

363 Reply by scorpio810

(15 replies, posted in EN : Help, suggestions, discussions, ...)

You use last devel 0.100 version?
Please send QET logs.

Go to forum: EN : Help, suggestions, discussions, ...

364 Reply by scorpio810

(10 replies, posted in FR : Aide, suggestions, discussions, ...)

https://github.com/qelectrotech/qelectr … t.cpp#L285

Go to forum: FR : Aide, suggestions, discussions, ...

365 Reply by scorpio810

(209 replies, posted in Import DXF)

The other possibility is I screwed something up, the last time I worked on a (non-plc) project as a team was in C++ but probably 12+ years ago now and we were using SVN. All my experience with Git is as a solo developer, and I have a tendency to just work off the main branch. I know it's not best habits and have been trying to learn better git technique, so I was working on these features in a different branch and then merged them.

I understand, FYI in the past we use also SVN, and moved to GIT ~ in 2019 on our host, and after on github since tuxfamily free/libre hoster 's probems.
And when we had to find a new host this time, and need to pay... we decided with Xavier, the creator of QET, to use only the github repository and not to put the GIT repository on the server.

From our experience, some pull requests made on the github didn't go through very well on our git hosted.
https://qelectrotech.org/forum/viewtopic.php?id=1427
https://qelectrotech.org/forum/viewtopic.php?id=2533

Go to forum: Import DXF

366 Reply by scorpio810

(209 replies, posted in Import DXF)

Hello Vadoola,

I 'm sorry .... I tried it last week and not saw you have updated repository since.

Git info informs me I have commit 886a57331d1b7cea045e32a8741ed4ee57473f50
"Some more work on Scaling Elements"


nomicons/wink

Edit: I have updated now but, is late for me, I will try it tomorow to try new version.

Go to forum: Import DXF

367 Reply by scorpio810

(10 replies, posted in FR : Aide, suggestions, discussions, ...)

Oui c'est bien le hotpot c'est le cadre virtuel qui contient tous les parties de ton symbole, si tu est sur de toi .... tu peut essayer manuellement de baisser les valeurs x et y en éditant le fichier xml du elmt, mais tu risques d'avoir ensuite des artefacts dans l'éditeur de folio si tu viens a déplacer ce même symbole par la suite si ce nouveau hotspot est plus petit que la zone de ton symbole....

Go to forum: FR : Aide, suggestions, discussions, ...

368 Reply by scorpio810

(9 replies, posted in Terminal block generator)

Uploaded qet_tb_generator and pysimplegui to Ubuntu 24.04 on my PPA.

Go to forum: Terminal block generator

369 Reply by scorpio810

(209 replies, posted in Import DXF)

Hello Vadoola!
Hallo plc-user!

I just upgraded my git local repository of code, use git pull and cargo update and cargo build --release and now I saw all time popup error even if DXF convertion working... it is for debug?

[src/qelmt/mod.rs:70:9] view_pt = Point {
    x: 0.0,
    y: 0.0,
    z: 0.0,
}
[src/qelmt/mod.rs:72:9] view_ht = 1.0
[src/qelmt/mod.rs:73:9] drw.header.insertion_base.clone() = Point {
    x: 0.0,
    y: 0.0,
    z: 0.0,
}
[src/qelmt/mod.rs:74:9] drw.header.minimum_drawing_extents.clone() = Point {
    x: 1e20,
    y: 1e20,
    z: 1e20,
}
[src/qelmt/mod.rs:75:9] drw.header.maximum_drawing_extents.clone() = Point {
    x: -1e20,
    y: -1e20,
    z: -1e20,
}
[src/qelmt/mod.rs:78:9] view = []
[src/qelmt/mod.rs:80:9] drw.header.default_drawing_units = Millimeters

Other

[src/qelmt/mod.rs:70:9] view_pt = Point {
    x: 0.0,
    y: 0.0,
    z: 0.0,
}
[src/qelmt/mod.rs:72:9] view_ht = 1.0
[src/qelmt/mod.rs:73:9] drw.header.insertion_base.clone() = Point {
    x: 0.0,
    y: 0.0,
    z: 0.0,
}
[src/qelmt/mod.rs:74:9] drw.header.minimum_drawing_extents.clone() = Point {
    x: 0.0,
    y: 0.0,
    z: 0.0,
}
[src/qelmt/mod.rs:75:9] drw.header.maximum_drawing_extents.clone() = Point {
    x: 1.683250261529439,
    y: 3.8125,
    z: 0.0,
}
[src/qelmt/mod.rs:78:9] view = []
[src/qelmt/mod.rs:80:9] drw.header.default_drawing_units = Unitless

Go to forum: Import DXF

370 Reply by scorpio810

(10 replies, posted in FR : Aide, suggestions, discussions, ...)

C'est lié aux balise html/css ?
Et ça se modifie quelque part pour la réduire à l’emprise de l'objet seulement ?

Non c'est interne a l’éditeur d'élément qui créer la zone qui englobe ton symbole, cela n'est il me semble pas modifiable, et ce n'est visible que quand on sélectionne un symbole dans l'éditeur de folio pour déplacer ou éditer un symbole, si on parle bien de la même chose?

Peut-être qu'un exemple minime de ta part pourrait mieux nous aiguiller, si tu pouvais le mettre en partage, pour etre sur qu'on parle bien de la même chose?

Go to forum: FR : Aide, suggestions, discussions, ...

371 Reply by scorpio810

(9 replies, posted in Terminal block generator)

Maybe with create your pyton virtual env?

python3 -m venv venv/ && source venv/bin/activate
pip install qet_tb_generator


laurent@debian:~$ whereis qet_tb_generator 
qet_tb_generator: /home/laurent/venv/bin/qet_tb_generator

When you need qet_tb_generator activate your virtual env before.
by

source venv/bin/activate

ps: qet_tb_generator in virtual env can't be launched by QET directly, I don't know why at this time, so you need to do in the terminal and wrote qet_tb_generator for launch it and choose where is your project and select it.


That's why I prefer the deb packages I had packaged, I think I also created them on the ubuntu PPA.
FYI qet_tb_generator need also pysimplegui with deb packages.

See https://launchpad.net/~scorpio/+archive … rotech-dev

and for the same way you if you want with pinning you can upgrade to lastest devel 0.100 versions, QET 0.8 release was now very very old.

Edit : Linux Mint 22. x is based on Ubuntu 24.04.
name is Noble.

Go to forum: Terminal block generator

372 Reply by scorpio810

(10 replies, posted in FR : Aide, suggestions, discussions, ...)

Par contre, est-(ce qu'il est possible de régler le l'emprise du cadra pointillé. Sur l'exemple Cxx en vert, il est beaucoup trop gros autour. Ou bien que la taille varie en fonction du zoom ?

Je pense que c'est du au fort zoom quand tu le sélectionnes, ce que tu vois est la zone hotspot qui encadre ton symbole pour sa sélection.

Go to forum: FR : Aide, suggestions, discussions, ...

373 Reply by scorpio810

(10 replies, posted in FR : Aide, suggestions, discussions, ...)

Bonjour,

pour cela il existe les outils envoyer au fond ou rapprocher au premier plan dans la barre de menu pour mieux sélectionner ou désélectionner les éléments trop proches les un des autres, ou qui se chevauchent. Il faut souvent bien zoomer pour mieux les envoyer au fond afin de sélectionner le bon élément souvent dans la zone de sélection de l'autre symbole..
https://download.qelectrotech.org/qet/manual_0.7/build/_images/qet_toolbar_depth.png

https://download.qelectrotech.org/qet/m … lbar-depth

Go to forum: FR : Aide, suggestions, discussions, ...

374 Reply by scorpio810

(15 replies, posted in EN : Help, suggestions, discussions, ...)

You can't see it in the project widget?

https://download.qelectrotech.org/qet/forum_img_2/company_titleblock.png

Go to forum: EN : Help, suggestions, discussions, ...

375 Reply by scorpio810

(15 replies, posted in EN : Help, suggestions, discussions, ...)

Maybe save as company title-blocks to ceate the folder .qet/titleblocks-company/?

Go to forum: EN : Help, suggestions, discussions, ...