226

Re: Ideas to solve Terminal Blocks creation

les bornes finales ne sont pas répertorier en tant que bornes.
de se fait elles se sont pas prisent en compte par le tb_generator

Post's attachments

BORNE FINALE.png, 50.57 kb, 1366 x 768
BORNE FINALE.png 50.57 kb, 27 downloads since 2019-06-09 

227

Re: Ideas to solve Terminal Blocks creation

Revision: 5906
Author:   scorpio810
Date:     2019-06-09 18:57:53 +0200 (Sun, 09 Jun 2019)
Log Message:
-----------
Elements final terminals change link type simlple to terminal, thanks S.DEFFAUX to report it

228

Re: Ideas to solve Terminal Blocks creation

Hello,

need help with with terminal block creation. I don't know how to generate terminal with conductor assigned at boottm. My elements (terminals) doesn't have Designation property to set them to "1,2". I am using latest plugin 1.0.16 on Windows 10.

Post's attachments

Capture.JPG, 100.44 kb, 885 x 640
Capture.JPG 100.44 kb, 7 downloads since 2019-08-01 

229

Re: Ideas to solve Terminal Blocks creation

Hello, 

link your reports before generate terminal blocks plug-in and you will have wires names.

230

Re: Ideas to solve Terminal Blocks creation

Hi,

thanks for reply but I don't understand what are you trying to say. Can you be more specific ?

231

Re: Ideas to solve Terminal Blocks creation

Hi

Post's attachments

Capture.png, 149.98 kb, 885 x 640
Capture.png 149.98 kb, 6 downloads since 2019-08-02 

232

Re: Ideas to solve Terminal Blocks creation

Example : https://download.tuxfamily.org/qet/sche … 19.qet.pdf

233

Re: Ideas to solve Terminal Blocks creation

I think I did everything ok in diagram attached in  this post, but still no names.

Post's attachments

Capture.JPG, 108.1 kb, 1049 x 713
Capture.JPG 108.1 kb, 5 downloads since 2019-08-05 

234

Re: Ideas to solve Terminal Blocks creation

Conductors connected on the same terminal can't have a different label name!
In principle QET does not allow it, and that is why the terminal block generator works badly in your example.

235

Re: Ideas to solve Terminal Blocks creation

If I understand you wiring attached should work. But there are still no names at bottom side of terminals.

Post's attachments

Capture.JPG, 45.13 kb, 662 x 474
Capture.JPG 45.13 kb, 2 downloads since 2019-08-05 

236

Re: Ideas to solve Terminal Blocks creation

I have same problem...

237

Re: Ideas to solve Terminal Blocks creation

BTW on 0.7, you can on the fly add some conductors texts manualhy on your terminal block without edit it, like my example.

238

Re: Ideas to solve Terminal Blocks creation

BTW ?
It worked automatically on the past without editing manually .....

239

Re: Ideas to solve Terminal Blocks creation

scorpio810 wrote:

Conductors connected on the same terminal can't have a different label name!
In principle QET does not allow it, and that is why the terminal block generator works badly in your example.

I looked at your example and found terminal which has different names at top and bottom. How did you achieved this ?

Post's attachments

Capture.JPG, 17.9 kb, 211 x 328
Capture.JPG 17.9 kb, 3 downloads since 2019-08-06 

240

Re: Ideas to solve Terminal Blocks creation

If I remember correctly, I had created this project in the previous year  (January 2018) with an old version of qet_tb_generator and a lot of manual editing in element editor for create fusers and also on the fly (dynamic texts) to complete the address of the PLC I/O but the output conductors  in this old version was generated .

Edit :
I just try it and latest version seem can't create them.

241

Re: Ideas to solve Terminal Blocks creation

If it is working in latest version (which i use right now) then I am still missing something.
Would you be so kind, and send me an example qet project, so I can open it and try it if I can generate correct terminals in my enviroment ?

242

Re: Ideas to solve Terminal Blocks creation

I edited previous post s/can/can't/, sorry for the typo.

Post's attachments

Attachment icon gestion-defib-18-07-19.zip 544.06 kb, 10 downloads since 2019-08-06