Re: Nouveautés de la version de développement 0.9

Trouvé: faut modifier le fichier:

sudo nano /etc/apt/preferences.d/40qelectrotech-devel

Re: Nouveautés de la version de développement 0.9

galexis wrote:

Pas de besoin tant que cela ne créé pas le bornier à la fin dans le schéma. Du moins, si ça demande du temps de travail. Le trie auto ne marche pas bien dans la branche principal: il trie par caractère à priori, il met le numéro 10 après la borne 1 par exemple.

J'ai refait quelques tests et c'est super encourageant. Mes remarques ou questions:
- le trie automatique ne fonctionne pas bien sur les nombre la borne 1 est suivi de la borne 10 et non de la borne 2
- Comment fait-on pour corriger manuellement la position ? La colonne ne semble pas modifiable
- Un drag and drop des bornes pour les mettre dans le bornier serait plus pratique que de passer par le menu déroulant "déplacer dans:"
- Comment fait-on pour renseigner le repère de câble et le numéro de fil dans le câble ? Est-ce fonctionnel aujourd'hui ?
- A priori la notion de groupe sert pour les bornes à étages, mais je n'ai trop compris à quoi servent les colonnes 0/1/2/3. Peut-être juste à mettre graphiquement en valeur les réglages réalisées ?
- La façon de dessiner le bornier avec des bornes à étages ne me parait pas hyper clair : visuellement on ne voit pas trop quelles bornes sont ensembles. peut-être matérialiser les séparations entre borne physique  à étage par un trait double ?
- Pour le moment, les fonctions diode, terre, etc... ne sont pas dessinées.
- Le petit bouton de la barre d'outils pour ajouter le bornier est bien pratique. Graphiquement, il manque la position.
Je tiens à t'encourager, car c'est vraiment prometteur !

Ne faudrait-il pas ouvrir un post spécifique placé en tête de liste pour l'éditeur de borniers ?

Re: Nouveautés de la version de développement 0.9

@Galexis:https://git.tuxfamily.org/qet/qet.git/c … 968c3ce8dd

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

For each user using our Github mirror, use this command to refresh it:
https://github.com/qelectrotech/qelectr … mirror.git

git reset --hard origin

FYI, qet_tb_generator on macOS need now python 3.11 with last macOS 0.100.0 versions.
https://qelectrotech.org/forum/viewtopi … 640#p17640

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

J'ai vu passer sur Git, mais c'est de quel widget dont il est question ?

Re: Nouveautés de la version de développement 0.9

@Galexis te faudra attendre que Josua te réponde, c'est marqué WIP pour l'instant..

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

scorpio810 wrote:

@Galexis te faudra attendre que Josua te réponde, c'est marqué WIP pour l'instant..

Qui signifie ?

Re: Nouveautés de la version de développement 0.9

travail en cours...

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

Work in progress.... Sorry.

Re: Nouveautés de la version de développement 0.9

Oui on peut remonter ce thread la : https://qelectrotech.org/forum/viewtopic.php?id=1486
Il faut que je prenne 5min pour mettre à jours le premier post par rapport à l'état actuel des choses.
Reposte ton commentaire sur l'autre fil de discutions j'y répondrais la bas au lieu d'ici, ce sera plus claire.

Merci beaucoup pour les encouragements nomicons/smile

n’hésite pas à remonter les choses comme tu le fait déjà, car malheureusement pour des raisons personnel je ne peut pas passer beaucoup de temps sur le développement de qet (je pense que certains on déjà remarqué la baisse de régime) et du coup les choses on vite faites d'être oublié.

Développeur QElectroTech

Re: Nouveautés de la version de développement 0.9

galexis wrote:

J'ai vu passer sur Git, mais c'est de quel widget dont il est question ?

C'est accessible depuis les propriétés du projet, c'est pour éditer l'aspect visuel du bornier. Attention c'est largement en travaux et il manque beaucoup  de chose (en arrière plan je prépare le future de qet).

Développeur QElectroTech

Re: Nouveautés de la version de développement 0.9

FYI, Update cross-compiler MXE x86_64 (Windows 64) builds to:


Qt: 5.15.7 => Qt: 5.15.8
KF5 5.99   => KF5 5.102

QElectroTech V 0.100.0-dev
Compilation : GCC 11.3.0
Built with Qt 5.15.8 - x86_64 - Date : Feb 28 2023 : 12:25:10
Run with Qt 5.15.8 using 12 thread(s)
CPU : NAME AMD RYZEN THREADRIPPER 3960X 24-CORE PROCESSOR
RAM Total : 40 GB
RAM Available : 35 GB
GPU : VideoProcessor VMware Virtual SVGA 3D Graphics Adapter
GPU RAM : RAM Total : AdapterRAM 268435456 B
OS : winnt - x86_64 - Version : Windows 11 Version 2009 - Kernel : 10.0.22621
*** Qt screens ***
( 1 : 3839 x 2159 )


03:49:20.075 Info: Start-up 
03:49:20.443 Info: Elements collection reload 
03:49:20.454 Info: debugging enabled: false 
03:49:20.454 Info: Qt library version: 5.15.8 
03:49:20.455 Info: Qt library location default prefix: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5" 
03:49:20.455 Info: Qt library location documentation: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/doc" 
03:49:20.456 Info: Qt library location headers: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/include" 
03:49:20.457 Info: Qt library location libraries: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/lib" 
03:49:20.458 Info: Qt library location executables: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/bin" 
03:49:20.458 Info: Qt library location Qt binaries: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/bin" 
03:49:20.459 Info: Qt library location Qt plugins: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/plugins" 
03:49:20.459 Info: Qt library location installed QML extensions: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/imports" 
03:49:20.461 Info: Qt library location installed QML extensions: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/qml" 
03:49:20.462 Info: Qt library location dependent Qt data: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5" 
03:49:20.462 Info: Qt library location independent Qt data: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5" 
03:49:20.463 Info: Qt library location translation: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/translations" 
03:49:20.464 Info: Qt library location examples: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/examples" 
03:49:20.464 Info: Qt library location Qt testcases: "/home/laurent/digikam/project/bundles/mxe/build.win64/usr/x86_64-w64-mingw32.static/qt5/tests" 
03:49:20.465 Info: "QElectroTech V 0.100.0-dev" 
03:49:20.465 Info: "Compilation : GCC 11.3.0" 
03:49:20.466 Info: "Built with Qt 5.15.8 - x86_64 - Date : Feb 28 2023 : 12:25:10" 
03:49:20.466 Info: "Run with Qt 5.15.8 using 12 thread(s)" 
03:49:20.467 Info: "CPU : NAME                                            \r\r\nAMD RYZEN THREADRIPPER 3960X 24-CORE PROCESSOR  \r\r\n\r\r\n" 
03:49:20.467 Info: "RAM Total : 40 GB" 
03:49:20.467 Info: "RAM Available : 35 GB" 
03:49:20.468 Info: "GPU : VideoProcessor                           \r\r\nVMware Virtual SVGA 3D Graphics Adapter  \r\r\n\r\r\n" 
03:49:20.468 Info: "GPU RAM : RAM Total : AdapterRAM  \r\r\n268435456   \r\r\n\r\r\n B" 
03:49:20.469 Info: "OS : winnt  - x86_64 - Version : Windows 11 Version 2009 - Kernel : 10.0.22621" 
03:49:20.469 Info: *** Qt screens *** 
03:49:20.470 Info: "( 1 : 3839 x 2159 )" 
03:49:20.472 Info: DISK : C:/   
03:49:20.472 Info: FileSystemType: "NTFS" 
03:49:20.473 Info: SizeTotal: 133 GB 
03:49:20.474 Info: AvailableSize: 78 GB 
03:49:20.474 Info: DISK : D:/   
03:49:20.475 Info: FileSystemType: "" 
03:49:20.476 Info: SizeTotal: 0 GB 
03:49:20.476 Info: AvailableSize: 0 GB 
03:49:20.477 Info: DISK : E:/   
03:49:20.477 Info: FileSystemType: "" 
03:49:20.478 Info: SizeTotal: 0 GB 
03:49:20.479 Info: AvailableSize: 0 GB 
03:49:20.480 Info: DISK USED: C:/   
03:49:20.480 Info: FileSystemType: "NTFS" 
03:49:20.481 Info: SizeTotal: 133 GB 
03:49:20.482 Info: AvailableSize: 78 GB 
03:49:30.335 Info: Elements collection finished to be loaded in 9.89 seconds 

https://download.qelectrotech.org/qet/forum_img_2/win11_version2.png

Enjoy! nomicons/wink

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

FYI, Update cross-compiler MXE x86_64 (Windows 64) builds to:


Qt: 5.15.8 => Qt: 5.15.9
KF5 5.102   => KF5 5.104

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

Restore qetshapeitem::polygon contextMenuEvent
see:
https://qelectrotech.org/forum/viewtopi … 204#p18204

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

https://www.tuxfamily.org/fr/news

Power hiccup
Posté le dimanche 2 juillet 2023, à 14:05 UTC

Today, around 05:39 UTC, we experienced a power hiccup (yeah, again…) that killed some hosts, unfortunately impacting all of our main services. Secondary services (MX2, NS2, etc.) are up. We are currently waiting for remote hands.

Power hiccup
Posté le dimanche 4 juin 2023, à 14:38 UTC

Yesterday, around 11:40 UTC, we experienced a power hiccup that killed some hosts. Impact was low and almost everything restarted properly. We managed to brought back most services a couple of hours ago. Unfortunately we just lost a big host storing most data for an unknown reason yet but probably related to disk arrays in bad shape after the power hiccup. We are currently waiting for remote hands.

Edit 2023-06-05 14:40 UTC: Alright, everything is back to normal!

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

https://www.tuxfamily.org/fr/news

services down
Posté le dimanche 9 juillet 2023, à 15:51 UTC

Today, around 11:37 UTC, we lost contact with some of our most important hosts, presumably following yet another power hiccup. Consequently, our main services (web areas, databases, SCM repositories, access to mailboxes, etc.) are down. Secondary services (MX2, NS2, etc.) are still up and running, along with download repositories. As this is being written, we cannot predict when exactly our services will recover and can only apologize for the significant downtime incurred. Please bear with us.

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

Add chinese translations, thanks Eric.

https://github.com/qelectrotech/qelectr … 9558981d8a
https://github.com/qelectrotech/qelectr … f8e4d72826
https://github.com/qelectrotech/qelectr … 98bfea7732

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

FYI, Update cross-compiler MXE x86_64 (Windows 64) builds to:

GCC 11.3.0 => 11.4.0
Qt: 5.15.9 => Qt: 5.15.11
KF5 5.104   => KF5 5.110

Enjoy! nomicons/wink

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

https://github.com/qelectrotech/qelectr … r/pull/268

Give the user a possibility to set the maximum number of parts during…
… import on an dxf file. Because sometimes the dxf file can contain more than 200 elements and the user is deleting some elements afterwards

https://download.qelectrotech.org/qet/forum_img_2/maxpart_config.png
https://download.qelectrotech.org/qet/forum_img_2/maxpart_editor.png

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

Change weighting of second conductor color, see : https://qelectrotech.org/bugtracker/view.php?id=292

On old project you can  search and replace with an text editor in your project.qet file :
dash-size="10" by dash-size="5" by example..

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

FYI, I made a new VM QEMU/KVM based on Xubuntu 20.04 and now based also to DigiKam scripts to build new AppImages
https://invent.kde.org/graphics/digikam … type=heads

Release          Released    End of life
Ubuntu 20.04 LTS    Apr 2020    Apr 2025

https://qelectrotech.org/forum/viewtopi … 061#p19061

GCC 8.0.0 -> GCC 13.1.0
Qt 5.11.3 -> Qt 5.15.11
KF5 5.67  -> KF5 5.110


QElectroTech V 0.100.0-dev
Compilation : GCC 13.1.0
Built with Qt 5.15.11 - x86_64 - Date : Nov 10 2023 : 13:58:25
Git Revision : 7447a7fd44271604868a0007698d96429eeaccab
Run with Qt 5.15.11 using 48 thread(s)

Enjoy! nomicons/wink

Edit: Changed to GCC 11 version.

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

This morning I updated my Windows 10 to last updates on my old laptop, after many reboots, I have idea to check last 0.100-devel QET version, wow !!!
Elements collection finished to be loaded in 1.23 seconds

You could confirm it?

Édition    Windows 10 Professionnel
Version    22H2
Installé le    10/03/2021
Build du système d’exploitation    19045.3930
Expérience    Windows Feature Experience Pack 1000.19053.1000.0
12:50:33.534 Info: "QElectroTech V 0.100.0-dev" 
12:50:33.535 Info: "Compilation : GCC 11.4.0" 
12:50:33.535 Info: "Built with Qt 5.15.11 - x86_64 - Date : Dec 21 2023 : 15:57:17" 
12:50:33.535 Info: "Run with Qt 5.15.11 using 8 thread(s)" 
12:50:33.536 Info: "CPU : NAME                                      \r\r\nINTEL(R) CORE(TM) I7-8550U CPU @ 1.80GHZ  \r\r\n\r\r\n" 
12:50:33.536 Info: "RAM Total : 16 GB" 
12:50:33.536 Info: "RAM Available : 11 GB" 
12:50:33.537 Info: "GPU : VideoProcessor                \r\r\nIntel(R) UHD Graphics Family  \r\r\n\r\r\n" 
12:50:33.537 Info: "GPU RAM : RAM Total : AdapterRAM  \r\r\n1073741824  \r\r\n\r\r\n B" 
12:50:33.538 Info: "OS : winnt  - x86_64 - Version : Windows 10 Version 2009 - Kernel : 10.0.19045" 
12:50:33.538 Info: *** Qt screens *** 
12:50:33.538 Info: "( 1 : 3840 x 2160 )" 
12:50:33.539 Info: DISK : C:/   
12:50:33.540 Info: FileSystemType: "NTFS" 
12:50:33.540 Info: SizeTotal: 66 GB 
12:50:33.541 Info: AvailableSize: 9 GB 
12:50:33.542 Info: DISK : D:/   
12:50:33.542 Info: FileSystemType: "NTFS" 
12:50:33.543 Info: SizeTotal: 20 GB 
12:50:33.543 Info: AvailableSize: 0 GB 
12:50:33.545 Info: DISK USED: C:/   
12:50:33.545 Info: FileSystemType: "NTFS" 
12:50:33.546 Info: SizeTotal: 66 GB 
12:50:33.547 Info: AvailableSize: 9 GB 
12:50:34.706 Info: Elements collection finished to be loaded in 1.23 seconds 

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: Nouveautés de la version de développement 0.9

FYI, I recently reset my laptop with HP Cloud Recovery, which reinstalls Windows 10 Pro from factory and then chose to migrate to lastest Windows 11 hhmmm  despite bad comments under web.., and subsequently do a dual boot Kubuntu 23.10 uefi off course.

When I tried QET installer on Windows 11, the launch time was very very slow... around 22 seconds.

18:59:07.059 Info: Elements collection finished to be loaded in 21.897 seconds 

I googled and used many tips and tricks to boost Win11 hum  ...a little better like 15 seconds....
https://www.windowscentral.com/software … windows-11

The best solution I found is to go to Windows Defender settings and exclude the "C:/Program Files/QElectroTech/" folder.

Go to Start > Settings > Update & Security > Windows Security > Virus & threat protection. Under Virus & threat protection settings, select Manage settings, and then under Exclusions, select Add or remove exclusions. Select Add an exclusion, and then select from files, folders, file types, or process.

Now QET launches in 1.5 seconds.

09:10:27.357 Info: "Compilation : GCC 11.4.0" 
09:10:27.357 Info: "Built with Qt 5.15.12 - x86_64 - Date : Feb 23 2024 : 17:48:58" 
09:10:27.358 Info: "Run with Qt 5.15.12 using 8 thread(s)" 
09:10:27.358 Info: "CPU : NAME                                      \r\r\nINTEL(R) CORE(TM) I7-8550U CPU @ 1.80GHZ  \r\r\n\r\r\n" 
09:10:27.359 Info: "RAM Total : 16 GB" 
09:10:27.359 Info: "RAM Available : 12 GB" 
09:10:27.359 Info: "GPU : VideoProcessor                \r\r\nIntel(R) UHD Graphics Family  \r\r\n\r\r\n" 
09:10:27.359 Info: "GPU RAM : RAM Total : AdapterRAM  \r\r\n1073741824  \r\r\n\r\r\n B" 
09:10:27.360 Info: "OS : winnt  - x86_64 - Version : Windows 11 Version 2009 - Kernel : 10.0.22621" 
09:10:27.360 Info: *** Qt screens *** 
09:10:27.360 Info: "( 1 : 3840 x 2160 )" 
09:10:27.361 Info: DISK : C:/   
09:10:27.361 Info: FileSystemType: "NTFS" 
09:10:27.362 Info: SizeTotal: 289 GB 
09:10:27.362 Info: AvailableSize: 206 GB 
09:10:27.363 Info: DISK USED: C:/   
09:10:27.363 Info: FileSystemType: "NTFS" 
09:10:27.364 Info: SizeTotal: 289 GB 
09:10:27.364 Info: AvailableSize: 206 GB 
09:10:27.470 Info: Elements collection reload 
09:10:28.752 Info: Elements collection finished to be loaded in 1.287 seconds 

Maybe excluding the item collection only can be enough, if your custom collection or enterprise collection has many item files, excluding them as well could improve launch times?


Edit:I 'm tried Defender (real time protection enabled) settings and exclude only the "C:/Program Files/QElectroTech/elements" folder.
Now launch time was ~ 3 to 5 seconds, FYI, on Windows to overcome the weaknesses of the slow file system I/O we therefore copy the elements files into RAM before launching..

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."