You are not logged in. Please login or register.
QElectroTech → Posts by Vbxler
Hello Laurent,
there is quite a rampant growth in the energy technology section.
I'm going to radically reorganize it all.
Otherwise I'll never finish the changes to the components.
As a result, many components are thrown out.
I hope nobody will be offended.
I wish everyone a nice weekend.
Thank you, you are right.
That's how it is.
I just noticed a small error:
If I navigate through the pages with the up and down arrow keys
and want to open the properties of the page with ctrl+L,
then I get the properties of the pages previously opened with the right click.
I am using the current version of QElektroTech on Xubuntu 20.04
Hello Laurent,
here are the revised symbols for pneumatic.
The main thing that has changed is the numbering of the elements.
Next I will edit the symbols for energy.
Have a nice weekend everyone
Rudolph
Thanks for your efforts, it works now!
Hello Laurent,
please let me know if the element names are correct.
The group '20_logic' can already be distributed.
I added the tip from posting #8 to the two erroneous elements.
https://qelectrotech.org/forum/viewtopic.php?id=2401
I wish a nice evening!
It is contained in the 20_logic.7z file:
https://qelectrotech.org/forum/viewtopic.php?id=2385
20_logic/2020_flow_chart/202010_flow_chart/20201000_start.elmt
20_logic/2020_flow_chart/202010_flow_chart/20201001_end.elmt
Nothing changes if I open the component with the component editor and then save it again.
A problem that already occurred when editing the pneumatic symbols is still there.
If the element is in the form of a horizontal tank, it will already be displayed incorrectly
in the preview and also in the plan page. With the pneumatic symbols I have to solve the
fact that I inserted a component from an old library. I was not allowed to change the
component, otherwise the error occurred again.
Maybe you could take a look, but there's no rush.
Hello, everyone!
Here is my suggestion how I would do it.
I plan to use number circles for folders and element files, so each element has a unique identification number.:
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101000_and.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101002_nand.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101010_or.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101012_nor.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101020_not.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101030_xor.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101031_xnor.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101060_input.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/20101070_output.elmt
20_logic/2010_logic_gates/201010_ANSI_IEEE/qet_directory
20_logic/2010_logic_gates/201020_IEC_60617/20102000_and_two.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102001_and_tree.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102002_nand.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102010_or_two.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102011_or_tree.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102012_nor.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102020_not.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102030_xor.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102031_xnor.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102060_input.elmt
20_logic/2010_logic_gates/201020_IEC_60617/20102070_output.elmt
20_logic/2010_logic_gates/201020_IEC_60617/qet_directory
20_logic/2010_logic_gates/201030_DIN_40700/20103000_and.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103002_nand.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103010_or.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103012_nor.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103020_not.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103030_xor.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103031_xnor.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103060_input.elmt
20_logic/2010_logic_gates/201030_DIN_40700/20103070_output.elmt
20_logic/2010_logic_gates/201030_DIN_40700/qet_directory
20_logic/2010_logic_gates/qet_directory20 | _logic
20 | 10 | _logic_gates
20 | 10 | 10 | _ANSI_IEEE
20 | 10 | 10 | 00_and.elmt
Of course, further groups or elements can be added at any time.
Here are my general rules:
Name of element files and folders
---------------------------------------
* Without spelling mistakes
* Characters: 'a..z', '0..9', '_'
* Lower case only
* Would the english language be possible for the elements? Perhaps better for an international used software?
Draw the elements:
-------------------------
* Port locations are multiples of 10.
* Distance between terminals 20
* Special components possibly even greater distance >40
Designation of the elements
-------------------------
* Without spelling mistakes
* Translation into the QET languages
* begins with an uper-case letter
* All characters are allowed except: <>&"'
The elements in hydraulics are well drawn, we can expand on them later.
If you're okay with that, I'll start with the Logic folder as a warm-up.
First of all, I will make a list with the rules for the components and send it to you.
So we have a fixed starting point. I will also include this page:
https://qelectrotech.org/wiki_new/en/do … guidelines
You're right, the libraries have to be freed from many duplicate components.
I don't know if I have a platform bug.
Maybe you could try if these components are also displayed like this in your case:
Hello Laurent and Joshua,
during the winter time I have more time available and so I wanted
to ask you if you are interested in redrawing more libraries?
The position of the pins is often not correct, the size of the devices is always different...
If you are interested, please let me know.
No, auto-save is deactivedet.
autosave-interval=0
Hello, everyone!
Is it possible that in one of the last versions of QET an automatic saving of the project was added?
From time to time, QET will appear frozen for a few seconds.
This is approximately the time that is used for a manual saving.
After that you can continue to work normally.
Quad Core model: AMD Ryzen 5 PRO 3500U
Ubuntu 20.04.5 LTS
QElectroTech V 0.90-DEV+c17492183
Thanks
Vbxler
Windows operating system?
Then you should not start qelectrotech.exe directly.
Use the *.bat file in the root directory.
This bat file contains the start parameters for the application:
@echo off
rem Se rend dans le dossier qui convient
set current_dir=%~dp0
cd /d %current_dir%
rem Met la collection QET en lecture seule
attrib +r elements/* /S /D
rem lance QElectroTech
set command=.\bin\qelectrotech.exe -platform windows:fontengine=freetype --common-elements-dir=elements/ --common-tbt-dir=titleblocks/ --lang-dir=lang/ --config-dir=conf/ LANG=de_DE -style plastique %*
@start %command%Here the program is started with German language.
Maybe something like that?
You can easily draw it yourself and then post it here.
The elements are usually drawn by the users or with their help.
Hallo Thomas,
das geht derzeit noch nicht, wurde aber im April als Wunsch aufgenommen:
https://qelectrotech.org/bugtracker/view.php?id=260
Werden wir also vielleicht bekommen ;-)
Du kannst bei der Zeilenzahl auch mehr Foilien angeben als tatsächlich benötigt werden.
Mit der SQL-Abfrage werden dann nur die verwendeten Foilien eintragen.
Die SQL-Abfrag muss du von Hand erstellen, wobei die richtigen Namen der Tabellen
verwendet werden müssen:
https://download.qelectrotech.org/qet/m … ables.html
Wenn du willst, kannst du mir dein Projekt als PM senden oder hier rein stellen und ich schaue es mir an.
Vielleicht noch folgender Vorschlag wie ich das mache:
Die SQL-Abfrage: SELECT title, folio, pos, date, indexrev FROM project_summary_view where title <> '-'
Genau, um das Inhaltsverzeichnis dreht es sich vermutlich.
Wenn du 25 Folien hast und das Inhaltsverzeichnis hat 22
Zeilen, dann ist nicht genügen Platz vorhanden um alle Folien
einzutragen.
Du markierst das Inhaltsverzeichnis und bekommst dann die Möglichkeit
die Anzahl der Zeilen zu ändern.
Wenn du viele Folien hast, kann man sich auch mit der Zeilen-
und/oder Schriftgröße spielen.
Hallo scorpio810,
here is a small example.
Thanks for the help!
Hello everyone,
is there a way that a wire's name can be moved to any position on the page?
In some cases this is currently prevented and the color of the wire is shown in red.
Thanks
Vbxler
Yes, I edited the file by hand.
That's where the error came from.
Sorry for the inconvenience caused by my mistake.
QElectroTech → Posts by Vbxler
Powered by PunBB, supported by Informer Technologies, Inc.
Generated in 0.019 seconds (65% PHP - 35% DB) with 5 queries