Discussion sur le générateur de borniers. (Page 4 of 4)

Salut oc67,

Merci pour ta proposition, mais je ne suis pas sûr d’avoir bien compris ton idée, et la fatigue n’aide pas ;o)

Si je résume : tu voudrais choisir, pour chaque type de borne, un élément de ta bibliothèque, et le générateur l’afficherait tel quel dans le plan de bornier, en s’occupant de tout le reste (connexions, repères, numérotation). C’est bien ça ?

Pour être sûr de bien comprendre, peux-tu donner un exemple concret ou un petit croquis de ce que tu voudrais obtenir ? Par exemple un type de borne que tu ne peux pas représenter aujourd’hui, et comment tu voudrais qu’il apparaisse dans le plan.

Merci pour ta contribution !

Me concernant, ça me va.

Merci à vous.

Element editor: add section, width and color to terminal elements
Terminal block elements can now define, in the element properties
dialog (Terminal block element group):
- the section in mm2 (combo box with the usual sections, editable)
- the width / manufacturer reference (Weidmuller, Phoenix Contact,
  WAGO, ABB Entrelec), filtered by the selected section
- the color, using the palette of the terminal strip (editable,
  accepts a name, #rrggbb or #rrggbb/#rrggbb)

Values are stored in the element informations (terminal_section,
terminal_width, terminal_color) with the dot as decimal separator,
the keys already read by RealTerminal. An empty value removes the key.

The sections and the manufacturer widths move from
terminalstripmodel.cpp to the new header-only terminalcatalog.h,
shared by the terminal strip editor and the element editor.

Terminal sections: show the AWG equivalent in the section lists
The section combo boxes of the terminal strip editor and of the
element editor now show the nearest AWG / kcmil size next to the
section in mm2, for example "2.5 mm² (AWG 14)".

The correspondence is approximate (the two systems don't have the
same steps) and is stored in TerminalCatalog::awgForSection().
The stored value is unchanged (terminal_section, in mm2).

Terminal catalog: more manufacturer widths and manufacturer filter
Extend the terminal catalog (terminalcatalog.h) with the widths of
more terminal blocks, from the catalogs of Phoenix Contact (UT),
Weidmuller (WDU), WAGO (TOPJOB S 2002/2006), ABB Entrelec (M series)
and Legrand (Viking 3). For Legrand and ABB Entrelec the value is the
pitch given by the catalog.

Each entry now carries its manufacturer, and the element properties
dialog gets a "Manufacturer" combo box before the width one. The list
of widths is filtered by manufacturer and by the selected section; if
the manufacturer has nothing for that section, all its terminals are
listed. The combo box is created by the code, no change in the .ui.

Terminal strip drawer: show only the terminal number, fit texts to cells
- Draw only the terminal number (the part after the last ':') instead of
  the full label (e.g. "1" instead of "XAUZ1:1"); the terminal manager
  and tree still show the full label.
- Clip each text to the width of its terminal and shrink the font in
  narrow terminals so that texts no longer overlap their neighbours.
- Remove the wire entry mark in the lower part of the terminal body,
  which overlapped the cross reference text.

Terminal strip drawer: draw terminals like a real terminal block
- Draw only the terminal number (part after the last ':'), the strip
  name is already in the header; the manager and the tree still show
  the full label.
- Clip texts to the width of their terminal and shrink the font in
  narrow terminals so they no longer overlap.
- New housing: body with narrower wire entry caps and a slope between
  them, grey by default (terminals with a color or a ground type keep
  theirs); stripes are clipped to this shape.
- White marker tags behind the number and the cross reference, fitted
  to the text and its alignment; black ribbed tags for isolating
  (sectional) terminals.
- Clamping parts (screw in a window, castle tab, big center circle, tab,
  screw) drawn in the free zone between the two tags, whatever the
  layout; fewer parts if the zone is small.
- Remove the wire entry mark that overlapped the cross reference text.