26 Reply by De-Backer (edited by De-Backer 2020-07-18 21:21:17)

Re: continuous blocks

De-Backer wrote:

Start QElectroTech
Ram 61.2MB (tot)
run file
Ram 200.3MB (tot)

QElectroTech V 0.80-DEV+68116f466d79751d3
Compilatie: GCC 9.3.0
Built with Qt 5.15.0 - Date : Jul 16 2020 : 11:04:52 
Run with Qt 5.15.0 using 16 thread(s)
OS : winnt - x86_64 - Version : Windows 10 Version 1909 - Kernel : 10.0.18363

for 0.7:
Start QElectroTech
Ram 67.3MB (tot)
run file
Ram 214.2MB (tot)

QElectroTech V 0.70+a375424c0d79751d3
Compilatie: GCC 8.3.0 - built with Qt 5.13.0 - Date : Jul 18 2019 : 16:02:17 - run with Qt 5.13.0 using 16 thread(s)
OS : winnt - x86_64 - Version : Windows 10 (10.0) - Kernel : 10.0.18363

ToT RAM os 5GB (1GB for google Chrome)

note: test on
qelectrotech-0.80-DEV+git6478-x86-win32-readytouse.7z
qelectrotech-0.70+git5967-x86-win32-readytouse.7z

27 Reply by De-Backer (edited by De-Backer 2020-07-18 21:38:57)

Re: continuous blocks

Maybe there is something wrong with the installer version of QElectroTech?
Or the elements user collection is too large?

@josaar2001
Can you try the Ready-to-use versions on your PC?

Re: continuous blocks

Good morning
I also had these blocks on win 7 pro
tried the 2 portable programs qelectrotech-0.80-DEV+git6478-x86-win32-readytouse.7z
qelectrotech-0.70+git5967-x86-win32-readytouse.7z
the blocks are always there
In my company I do projects, installations and technical interventions,
time is not enough, for symbols I first take a picture and resize it than create them.
Maybe I got carried away on the graphic part, I'm thinking of dividing the projects into several parts in order to make them lighter

Greetings and happy Sunday

Re: continuous blocks

Yet why do I not get those stutters.
Frustrated to know that there is a problem and that I cannot simulate it.
I will make low specs VM machine and test it.

30 Reply by De-Backer (edited by De-Backer 2020-07-19 09:50:14)

Re: continuous blocks

loading class MasterPropertiesWidget seems to cause delays (making the slave elemente image)
@josaar2001 Can you confirm that the hitch only happens when a master element is selected?

(note tested on 0.7)

Re: continuous blocks

Hello
When I open the project it seems to be fine for about 2 minutes, then it starts to freeze for a few seconds when I change the page, when I select an element and even without doing anything, it seems that it is waiting for something like saving. In version 0.60 these problems did not occur, tomorrow in the company I try with version 0.60
The problem looks the same as @ david.marinon who posted 2020.03.10 the program hangs every 2 minutes

Regards

Re: continuous blocks

Good morning

This morning I tried the project with vers. 0.60 there were no blocks.
If it can help
Vers. 0.70, I am attaching 2 photos
photo1 normal operation of the project
photo2 during the block

Post's attachments

Attachment icon foto.7z 732.66 kb, 178 downloads since 2020-07-20 

Re: continuous blocks

=> Drive
you still have an HDD instead of an SSD?
the cause will go about writing to and reading from the file.
RAM is ok CPU too.

  • scorpio810
  • scorpio810
  • QElectroTech Team Manager, Developer, Packager
  • Offline

Re: continuous blocks

In General settings -> project try disable autosave.

Post's attachments

autosave.png, 85.33 kb, 1308 x 1123
autosave.png 85.33 kb, 191 downloads since 2020-07-20 

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."

Re: continuous blocks

SSD
saving is disabled, the problem remains

Re: continuous blocks

josaar2001 wrote:

SSD
saving is disabled, the problem remains

Don't get me wrong I said the problem is around reading and writing.

De-Backer wrote:

=> Drive
you still have an HDD instead of an SSD?
the cause will go about writing to and reading from the file.
RAM is ok CPU too.

Of course we look further in the code on our side, the OS and the PC is for you.