1 Topic by jkaminski (edited by jkaminski 2021-05-15 06:32:02)

  • jkaminski
  • Nouveau membre
  • Offline

Topic: Label text overlapping with reference text [ver 0.9]

Dear QElectroTech Developers and Users,

I enjoy the QET software a lot and am grateful for your amazing contributions. I am still learning and found one small problem, and am asking for your help here.

As in the picture attached, the text label "Q13" is overlapping master component reference text "(2-F2)".
How to increase the visibility and separate these text fields better?

With my best efforts, I was unable to change this, and these two pieces of text always moved together.
I would appreciate your help. Thank you for your time and consideration.

Best regards,
Jakub

Post's attachments

Attachment icon image_2021-05-15_003157.png 11.07 kb, 239 downloads since 2021-05-15 

2 Reply by scorpio810

  • scorpio810
  • scorpio810
  • QElectroTech Team Manager, Developer, Packager
  • Offline

Re: Label text overlapping with reference text [ver 0.9]

https://download.qelectrotech.org/qet/m … tings.html

"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."Questions regarding QET belong in this forum and will NOT be answered via PM! – Les questions concernant QET doivent être posées sur ce forum et ne seront pas traitées par MP !

3 Reply by DEndel

  • DEndel
  • Nouveau membre
  • Offline

Re: Label text overlapping with reference text [ver 0.9]

Did this fix the problem? I have one element in a project that does this and I can't fix it.  All others are fine. The problem goes away I just discovered when I change it from view cross to view contact!

4 Reply by DEndel

  • DEndel
  • Nouveau membre
  • Offline

Re: Label text overlapping with reference text [ver 0.9]

now I cannot recreate the problem. very strange....

5 Reply by jarek

  • jarek
  • Nouveau membre
  • Offline

Re: Label text overlapping with reference text [ver 0.9]

I run today into this problem (I'm not drawing very often) and it seems changing anything in this settings (like adding space at end of formula) fixed the problem.