Différences

Ci-dessous, les différences entre deux révisions de la page.

--- doc:macosx [17/01/2023 15:25] – scorpio810
+++ doc:macosx [09/01/2024 16:01] (Version actuelle) – [Macports arm64 Apple silicon environments MAC Mini M2] scorpio810
@@ Ligne 1: / Ligne 1: @@
 ~~NOCACHE~~
-====== QElectroTech sous MacOSX ======
+===== QElectroTech sous MacOSX =====
-===== New toolchain build 2023 (macport) =====
+===== Macports arm64 Apple silicon environments MAC Mini M2 =====
+<code>
+git clone https://invent.kde.org/graphics/digikam.git
+cd digikam/project/bundles/macports/
+</code>
+<code=diff>diff --git a/project/bundles/3rdparty/ext_kf5/CMakeLists.txt b/project/bundles/3rdparty/ext_kf5/CMakeLists.txt
+index 41a75f247f..04307322bd 100755
+--- a/project/bundles/3rdparty/ext_kf5/CMakeLists.txt
++++ b/project/bundles/3rdparty/ext_kf5/CMakeLists.txt
+@@ -107,7 +107,7 @@ function(InstallKDEComponent
+                             CONFIGURE_COMMAND cp ${CMAKE_CURRENT_SOURCE_DIR}/../../../../bootstrap.macports <SOURCE_DIR>/. &&
+                                               sed -i '' -e "s/DBUILD_TESTING=ON/DBUILD_TESTING=OFF/g" <SOURCE_DIR>/bootstrap.macports &&
+-                                              <SOURCE_DIR>/bootstrap.macports ${EXTPREFIX_frameworks} debug x86_64 "${argoptions}"
++                                              <SOURCE_DIR>/bootstrap.macports ${EXTPREFIX_frameworks} debug arm64 "${argoptions}"
+                             BUILD_COMMAND cd <SOURCE_DIR>/build && $(MAKE)
+diff --git a/project/bundles/macports/01-build-macports.sh b/project/bundles/macports/01-build-macports.sh
+index 669ec675c1..82ac0ff093 100755
+--- a/project/bundles/macports/01-build-macports.sh
++++ b/project/bundles/macports/01-build-macports.sh
+@@ -210,7 +210,7 @@ EOF
+         # No need to build with both architectures embeded (x86 and ARM) for Apple Silicon target
+         cat << EOF >> "$INSTALL_PREFIX/etc/macports/variants.conf"
+-+universal
++++arm64
+ EOF
+     fi
+@@ -275,25 +275,11 @@ port install \
+              libpng \
+              jpeg \
+              tiff \
+-             boost \
+-             eigen3 \
+              gettext \
+              libusb \
+-             libgphoto2 \
+-             jasper \
+-             lcms2 \
+-             expat \
+              libxml2 \
+              libxslt \
+              libical \
+-             lensfun \
+-             bison \
+-             py38-lxml \
+-             x265 \
+-             libde265 \
+-             libheif \
+-             aom \
+-             ffmpeg \
+              wget +ssl \
+              qt5-qtbase \
+              qt5-qtdeclarative \
+@@ -305,22 +291,11 @@ port install \
+              qt5-qttranslations \
+              qt5-qtimageformats \
+              qt5-qtnetworkauth \
+-             qt5-sqlite-plugin \
+-             qt5-mysql-plugin $MP_MARIADB_VARIANT
++             qt5-sqlite-plugin
+-port deactivate boost
++#port deactivate boost
+-if [[ $DK_QTWEBENGINE = 1 ]] ; then
+-    port install qt5-qtwebengine
+-
+-else
+-
+-    port install qt5-qtwebkit
+-
+-fi
+-
+-port activate boost
+ # port broken since a while. check later
+ #             sane-backends \
+@@ -360,18 +335,7 @@ cmake $ORIG_WD/../3rdparty \
+        -DKA_VERSION=$DK_KA_VERSION \
+        -DKP_VERSION=$DK_KP_VERSION \
+        -DKDE_VERSION=$DK_KDE_VERSION \
+-       -DENABLE_QTVERSION=$DK_QTVERSION \
+-       -DENABLE_QTWEBENGINE=$DK_QTWEBENGINE \
+-       -Wno-dev
+-
+-if [[ $DK_QTWEBENGINE = 0 ]] ; then
+-    cmake --build . --config RelWithDebInfo --target ext_qtwebkit    -- -j$CPU_CORES
+-fi
+-
+-cmake --build . --config RelWithDebInfo --target ext_opencv      -- -j$CPU_CORES
+-cmake --build . --config RelWithDebInfo --target ext_imagemagick -- -j$CPU_CORES
+-cmake --build . --config RelWithDebInfo --target ext_libjxl      -- -j$CPU_CORES
+-cmake --build . --config RelWithDebInfo --target ext_libavif     -- -j$CPU_CORES
++       -DENABLE_QTVERSION=$DK_QTVERSION
+ #################################################################################################
+diff --git a/project/bundles/macports/02-build-extralibs.sh b/project/bundles/macports/02-build-extralibs.sh
+index a94632c1a6..ca39301c7f 100755
+--- a/project/bundles/macports/02-build-extralibs.sh
++++ b/project/bundles/macports/02-build-extralibs.sh
+@@ -68,16 +68,15 @@ cmake $ORIG_WD/../3rdparty \
+        -DKA_VERSION=$DK_KA_VERSION \
+        -DKP_VERSION=$DK_KP_VERSION \
+        -DKDE_VERSION=$DK_KDE_VERSION \
+-       -DENABLE_QTVERSION=$DK_QTVERSION \
+-       -DENABLE_QTWEBENGINE=$DK_QTWEBENGINE \
+-       -Wno-dev
++       -DENABLE_QTVERSION=$DK_QTVERSION
++
+ # NOTE: The order to compile each component here is very important.
+ # core KF5 frameworks dependencies
+ cmake --build . --config RelWithDebInfo --target ext_extra-cmake-modules -- -j$CPU_CORES
+ cmake --build . --config RelWithDebInfo --target ext_kconfig             -- -j$CPU_CORES
+-cmake --build . --config RelWithDebInfo --target ext_breeze-icons        -- -j$CPU_CORES
++#cmake --build . --config RelWithDebInfo --target ext_breeze-icons        -- -j$CPU_CORES
+ cmake --build . --config RelWithDebInfo --target ext_kcoreaddons         -- -j$CPU_CORES
+ cmake --build . --config RelWithDebInfo --target ext_kwindowsystem       -- -j$CPU_CORES
+ cmake --build . --config RelWithDebInfo --target ext_solid               -- -j$CPU_CORES
+@@ -106,10 +105,10 @@ cmake --build . --config RelWithDebInfo --target ext_kimageformats       -- -j$C
+ #cmake --build . --config RelWithDebInfo --target ext_libksane            -- -j$CPU_CORES
+ # Calendar support
+-cmake --build . --config RelWithDebInfo --target ext_kcalendarcore       -- -j$CPU_CORES
++#cmake --build . --config RelWithDebInfo --target ext_kcalendarcore       -- -j$CPU_CORES
+ # Breeze style support
+-cmake --build . --config RelWithDebInfo --target ext_breeze              -- -j$CPU_CORES
++#cmake --build . --config RelWithDebInfo --target ext_breeze              -- -j$CPU_CORES
+ #################################################################################################
+diff --git a/project/bundles/macports/config.sh b/project/bundles/macports/config.sh
+index 37341eefb0..65c9e37442 100644
+--- a/project/bundles/macports/config.sh
++++ b/project/bundles/macports/config.sh
+@@ -16,7 +16,7 @@ BUILDING_DIR="`pwd`/temp.build"
+ ########################################################################
+ # Target macOS architecture: "x86_64" for Intel 64 bits, or "arm64" for Apple Silicon 64 bits.
+-ARCH_TARGET="x86_64"
++ARCH_TARGET="arm64"
+ if [[ $ARCH_TARGET = "x86_64" ]] ; then
+@@ -50,7 +50,7 @@ if [[ $ARCH_TARGET = "x86_64" ]] ; then
+ elif [[ $ARCH_TARGET = "arm64" ]] ; then
+     # Apple Silicon is supported since macOS BigSur
+-    OSX_MIN_TARGET="11.0"
++    OSX_MIN_TARGET="12.3"
+ else
+@@ -128,7 +128,7 @@ DK_VERSION=master
+ DK_DEBUG=0
+ # Option to use QtWebEngine instead QtWebkit
+-DK_QTWEBENGINE=1
++DK_QTWEBENGINE=0
+ # Sign bundles with GPG. Passphrase must be hosted in ~/.gnupg/dkorg-gpg-pwd.txt
+ DK_SIGN=0
+</code>
+Add in your .bash_profile or in zsh profile [[https://support.apple.com/en-ca/HT208050|see]]
+<code>
+PATH="/opt/digikam.org.arm64/libexec/qt5/bin:${PATH}"
+PATH="/opt/digikam.org.arm64/bin:${PATH}"
+export PATH=/opt/digikam.org.arm64/libexec:$PATH
+export PATH=/opt/digikam.org.arm64/include:$PATH
+</code>
+<code>
+Copy your libs KF5 *.pri  /opt/digikam.org.arm64/mkspecs/modules/  to /opt/digikam.org.arm64/libexec/qt5/mkspecs/modules/
+Edit your libs KF5 *.pri files in /opt/digikam.org.arm64/libexec/qt5/mkspecs/modules/ like this:
+QT.KCoreAddons.VERSION = 5.110.0
+QT.KCoreAddons.MAJOR_VERSION = 5
+QT.KCoreAddons.MINOR_VERSION = 110
+QT.KCoreAddons.PATCH_VERSION = 0
+QT.KCoreAddons.name = KF5CoreAddons
+QT.KCoreAddons.module = KF5CoreAddons
+QT.KCoreAddons.defines =
+QT.KCoreAddons.includes =  $$PWD/../../include/KF5/KCoreAddons
+QT.KCoreAddons.private_includes =
+QT.KCoreAddons.libs = $$PWD/../../lib
+QT.KCoreAddons.depends = core
+QT.KCoreAddons.module_config =
+To:
+QT.KCoreAddons.VERSION = 5.110.0
+QT.KCoreAddons.MAJOR_VERSION = 5
+QT.KCoreAddons.MINOR_VERSION = 110
+QT.KCoreAddons.PATCH_VERSION = 0
+QT.KCoreAddons.name = KF5CoreAddons
+QT.KCoreAddons.module = KF5CoreAddons
+QT.KCoreAddons.defines =
+QT.KCoreAddons.includes =  /opt/digikam.org.arm64/include/KF5/KCoreAddons
+QT.KCoreAddons.private_includes =
+QT.KCoreAddons.libs = /opt/digikam.org.arm64/lib
+QT.KCoreAddons.depends = core
+QT.KCoreAddons.module_config =
+</code>
+===== MacOS Macports environment (new 2023) =====
-We use Digikam scripts for create toolchain with Sqilte3 for project database exporting.\\
+We use now Digikam scripts, for create Qt 5.15.X compile environment with qt5-sqlite-plugin (Sqilte3) for database project exporting.\\
 See:
 https://invent.kde.org/graphics/digikam/-/tree/master/project/bundles/macports \\
@@ Ligne 12: / Ligne 231: @@
 https://invent.kde.org/graphics/digikam/-/blob/master/project/bundles/macports/README
-We only use 01-build-macports.sh and 02-build-extralibs.sh script for build a MacOS Macports environment. \\
+We only use __01-build-macports.sh__ and __02-build-extralibs.sh script__ to build MacOS Macports environment for QET builds.
 <code>
 git clone https://invent.kde.org/graphics/digikam.git
-cd digikam/project/bundles/macports/
+cd digikam/project/bundles/macports/</code>
+//You can comment some packages which are not useful for QElectroTech \\
+like qt5-qtwebengine, qt5-qtwebkit, etc.//
+<code>
 bash ./01-build-macports.sh
-If ok then
-bash ./02-build-extralibs.sh
-Add in your .bash_profile
+</code>If ok then
+//you can comment some packages which are not useful for QElectroTech, \\
+but keep ext_kcoreaddons and ext_kwidgetsaddons!//
+<code>
+bash ./02-build-extralibs.sh
+</code>
+Add in your .bash_profile or in zsh profile [[https://support.apple.com/en-ca/HT208050|see]]
+<code>
 # Setting PATH for Qt5.15.x
 PATH="/opt/digikam.org.x86_64/libexec/qt5/bin:${PATH}"
@@ Ligne 30: / Ligne 258: @@
 </code>
+Note : On APPLE M1/2 chips replace in PATH  /opt/digikam.org.x86_64 by /opt/digikam.org.arm64 \\
+but with Qt 5.15.8 environment can't compil like:
+//Can't build QET with MacPorts and Digikam scripts, I have linking errors:
+............building for macOS-arm64 but attempting to link with file config macOS-x86_64..... For KF5 libs...//
-===== Old toolchain build (brew) =====
+Get GIT sources
+<code>
+git clone --recursive https://github.com/qelectrotech/qelectrotech-source-mirror.git
+</code>
+Build bundle:
+We need to add lang1 in qet_git directory with [[https://download.qelectrotech.org/qet/Qt_lang/lang1.zip|these unzipped files]] \\
+And create a MAC_OS_X directory in your home otherwise bundles builds was located in /build-aux/mac-osx/ folder.
+<code>
+bash qet_git/misc/MacQetDeploy.sh
+</code>
+===== MacOS Homebrew environment (old) =====
+* Note : we can't use Qt 5 sqlite3 plug-in without compile Qt 5 \\
 [[https://invent.kde.org/packaging/homebrew-kde]]
@@ Ligne 103: / Ligne 347: @@
 <code>
-git clone git://git.tuxfamily.org/gitroot/qet/qet.git qet_git
+git clone --recursive https://github.com/qelectrotech/qelectrotech-source-mirror.git
 </code>

Différences

Recherche

Navigation

QElectroTech

Participate

Imprimer/exporter

Outils